Master the Art of How to Jump Start Infiniti FX35: Insider Tips and Tricks

The Infiniti FX35 is a luxurious and powerful SUV, but even the most reliable vehicles can experience battery issues. If your FX35’s battery has died, don’t panic! This guide will walk you through the process of how to jump start an Infiniti FX35, ensuring you get back on the road quickly and safely.

Gather Your Supplies

Before you begin, ensure you have the following items:

• A working jump starter: This is essential for providing the necessary power to jump start your FX35’s battery.
• Jumper cables: Choose a set of heavy-duty jumper cables with clamps in good condition.
• A second vehicle with a fully charged battery: This vehicle will act as the power source.
• Safety glasses: Wear these to protect your eyes from any potential sparks.
• Gloves: Wearing gloves will protect your hands from cold metal and potential battery acid spills.

Safety First: Important Precautions

Jump starting a car involves working with electricity, so safety is paramount. Always follow these precautions:

• Never smoke or use a mobile phone while jump starting.
• Avoid touching the battery terminals while the engine is running.
• If you smell burning or see sparks, immediately disconnect the cables.
• Always ensure the vehicles are parked on a level surface.
• Never touch the jumper cable clamps while the engines are running.

Step-by-Step Guide to Jump Starting Your Infiniti FX35

1. Park the Vehicles Safely:

• Park the second vehicle (the one with a working battery) close enough to your Infiniti FX35 to reach the batteries with the jumper cables.
• Ensure both vehicles are parked on a level surface and the parking brakes are engaged.

2. Connect the Jumper Cables:

• Positive (Red) Cable: Connect one end of the red cable to the positive (+) terminal of the dead battery in your FX35.
• Positive (Red) Cable: Connect the other end of the red cable to the positive (+) terminal of the working battery in the second vehicle.
• Negative (Black) Cable: Connect one end of the black cable to the negative (-) terminal of the working battery in the second vehicle.
• Negative (Black) Cable: Connect the other end of the black cable to a metal grounding point on your FX35’s frame. Avoid connecting it directly to the battery’s negative terminal.

3. Start the Assist Vehicle:

• Start the engine of the vehicle with the working battery and let it run for a few minutes.

4. Start the Infiniti FX35:

• Try starting your FX35. It should start normally.
• If it doesn’t start immediately, try again after letting the engines run for a few more minutes.

5. Disconnect the Cables:

• Once your FX35 starts, disconnect the jumper cables in the reverse order you connected them.

Driving After a Jump Start

• After successfully jump starting your FX35, drive it for at least 30 minutes to recharge the battery.
• Avoid using any accessories that draw a significant amount of power, such as air conditioning or headlights, while driving.

Troubleshooting Common Issues

If you encounter problems jump starting your FX35, here are some possible causes and solutions:

• Battery is completely dead: The battery may be too depleted to accept a charge. Consider replacing the battery.
• Loose connections: Ensure all jumper cable clamps are securely connected to the battery terminals and grounding point.
• Faulty jumper cables: If the jumper cables are faulty, they may not be transferring enough current. Use a different set of cables.
• Issues with the starter: If the starter motor is faulty, the engine might not turn over even with a jump start. You’ll need to have the starter inspected and potentially replaced.
• Damaged alternator: If the alternator is not charging the battery properly, the battery will continue to drain even after a jump start. Have the alternator checked and repaired.

Preventing Future Battery Issues

• Regularly check the battery’s condition: Check the battery terminals for corrosion and ensure they are clean.
• Avoid leaving accessories on: Turn off headlights, radio, and other accessories when the engine is off.
• Consider a battery tender: Use a battery tender to keep the battery charged when the vehicle is not in use for extended periods.
• Replace the battery when necessary: A battery’s lifespan is typically 3-5 years. If your battery is older, it may be time for a replacement.

Time to Hit the Road!

By following these steps and safety precautions, you can confidently jump start your Infiniti FX35 and get back on the road. Remember, if you’re unsure about any part of the process, it’s always best to consult a qualified mechanic.

Quick Answers to Your FAQs

Q: Can I jump start my FX35 with a smaller vehicle?

A: While it’s possible, it’s not recommended. A smaller vehicle may not have enough power to jump start a larger vehicle. It’s best to use a vehicle with a similar or larger engine size.

Q: How long can I leave the jumper cables connected?

A: It’s generally safe to leave the jumper cables connected for a few minutes while starting the FX35. However, prolonged connection can overheat the cables and potentially damage the batteries. Disconnect them as soon as the engine starts.

Q: What should I do if I see sparks when connecting the cables?

A: Immediately disconnect the cables. Sparks usually indicate a loose connection or a short circuit. Inspect the connections and ensure they are secure. If the problem persists, consult a mechanic.

Q: How long should I drive after a jump start?

A: Drive the FX35 for at least 30 minutes to ensure the battery is sufficiently recharged. This will help prevent the battery from dying again soon.

Q: What if I can’t jump start my FX35?

A: If you’re unable to jump start your FX35, contact a qualified mechanic. They can diagnose the problem and provide the necessary repairs.