Drive Smarter, Not Harder: Essential Tips for Using Cruise Control on Your Mitsubishi Mirage

The Mitsubishi Mirage is a compact and fuel-efficient car, perfect for city driving and long road trips. But did you know it also comes equipped with a handy feature that can make your highway journeys even more comfortable and stress-free? That’s right, the Mitsubishi Mirage has cruise control! This feature allows you to maintain a constant speed without having to constantly press the gas pedal, reducing fatigue and making your drives more enjoyable.

This blog post will guide you through the simple steps on how to use cruise control on your Mitsubishi Mirage, ensuring you can make the most of this convenient feature.

Identifying the Cruise Control Buttons

Before you can activate cruise control, you need to locate the buttons on your steering wheel. The Mitsubishi Mirage‘s cruise control buttons are usually situated on the left side of the steering wheel, near the turn signal stalk. Here’s what you need to look for:

• SET/RES button: This button is used to set the cruise control speed and resume the last set speed.
• + and – buttons: These buttons allow you to increase or decrease the set speed.
• CANCEL button: This button is used to disengage cruise control.

Getting Started with Cruise Control

Now that you’ve located the buttons, it’s time to activate cruise control. Follow these simple steps:

1. Engage the cruise control system: Press the SET/RES button once to engage the system. The cruise control indicator light on your dashboard should illuminate.
2. Set your desired speed: Once the cruise control system is engaged, accelerate to your desired speed.
3. Set the speed: Press the SET/RES button again to set the cruise control speed. The car will maintain this speed automatically.

Adjusting Your Cruise Control Speed

While cruising, you may need to adjust your speed. Here’s how to do it:

• Increase speed: Press the + button to increase the set speed by 1 mph each press.
• Decrease speed: Press the – button to decrease the set speed by 1 mph each press.

Disengaging Cruise Control

You may need to disengage cruise control for various reasons, such as approaching traffic or needing to slow down for a turn. To do this, simply:

• Press the CANCEL button: This will immediately disengage the cruise control system.
• Tap the brake pedal: This will also disengage the cruise control system.

Using the Resume Function

The Mirage’s cruise control system also offers a handy “Resume” function. This allows you to easily return to your previously set speed after disengaging the system. Here’s how it works:

1. Disengage cruise control: Press the CANCEL button or tap the brake pedal.
2. Reactivate cruise control: Press the SET/RES button once to re-engage the system.
3. Resume the previous speed: Press the SET/RES button again to resume the last set speed.

Understanding Cruise Control Limitations

While cruise control is a fantastic feature, it’s important to remember that it’s not a replacement for attentive driving. Here are some limitations to keep in mind:

• Cruise control doesn’t work in all conditions: It may disengage automatically in situations like heavy traffic, steep inclines, or sharp curves.
• It’s not designed for city driving: Cruise control is primarily intended for highway driving, where speeds are relatively consistent.
• You still need to be aware of your surroundings: Always be prepared to take over manual control of your vehicle if necessary.

Recommendations: Cruise Control – Your Highway Companion

Mastering the use of cruise control on your Mitsubishi Mirage can significantly enhance your driving experience. It’s a simple yet effective feature that can make long drives more comfortable and less stressful. Remember to always be aware of your surroundings and be ready to take control of your vehicle when needed.

Basics You Wanted To Know

Q: Can I use cruise control in heavy traffic?

A: No, it’s not recommended to use cruise control in heavy traffic. The system may disengage unexpectedly, and it’s best to maintain manual control in such situations.

Q: What happens if I press the brake pedal while using cruise control?

A: Pressing the brake pedal will disengage the cruise control system, and you’ll need to manually control your speed.

Q: Can I adjust the cruise control speed while driving uphill or downhill?

A: Yes, you can adjust the cruise control speed while driving uphill or downhill using the + and – buttons. However, be aware that the system may need to adjust the speed automatically to maintain a safe and smooth ride.

Q: How do I know if the cruise control system is working properly?

A: The cruise control indicator light on your dashboard will illuminate when the system is engaged. If the light doesn‘t turn on, or if the system doesn‘t function as expected, you may need to consult your owner’s manual or a qualified technician.