Discover Now: Essential Steps for How to Reset Oil Light Dodge Journey 2017

The dreaded oil light. It flickers on, casting a shadow of worry over your driving experience. For Dodge Journey 2017 owners, this blinking indicator can be a source of confusion and stress. But fear not! This guide will equip you with the knowledge to confidently reset your oil light and get back on the road.

Understanding the Oil Light

The oil light in your Dodge Journey 2017 is not just a random signal; it’s a vital indicator of your engine’s health. It’s triggered by the vehicle’s onboard computer, which monitors the oil level and quality. When the light comes on, it’s a clear sign that your engine needs attention.

Why Does the Oil Light Come On?

There are several reasons why your Dodge Journey 2017’s oil light might illuminate:

• Low Oil Level: This is the most common reason. Your engine requires a specific amount of oil to lubricate moving parts and prevent wear and tear. When the oil level drops below the minimum threshold, the light will come on.
• Oil Change Reminder: Modern vehicles are equipped with an oil life monitoring system. When it’s time for an oil change, the light will activate as a reminder.
• Oil Quality Issues: Over time, engine oil degrades and loses its effectiveness. If the oil becomes too contaminated or old, the light might come on.
• Sensor Malfunction: While rare, a faulty oil level sensor can trigger the light even if your oil levels are sufficient.

Step-by-Step Guide: Resetting the Oil Light

Before embarking on the reset process, it’s crucial to understand that simply resetting the light won‘t fix the underlying issue. If your oil light is on, you should address the root cause before resetting.

Here’s how to reset the oil light on your Dodge Journey 2017:

1. Turn the Ignition On: Insert your key into the ignition and turn it to the “ON” position, but **do not start the engine**.
2. Locate the Trip Odometer: On your dashboard, you’ll find the trip odometer. This is the display that shows the distance you’ve traveled on a particular trip.
3. Press the Trip Reset Button: Look for a small button near the trip odometer. This button is usually labeled “RESET” or has a similar symbol. Press and hold this button until the trip odometer resets to zero.
4. Turn the Ignition Off: Release the button and turn the ignition off.
5. Turn the Ignition On Again: Turn the ignition back on, and the oil light should now be reset.

Checking Your Oil Level

After resetting the light, it’s essential to check your oil level. Here’s how:

1. Park on Level Ground: Ensure your vehicle is parked on a flat surface to get an accurate reading.
2. Wait for Engine to Cool: Allow your engine to cool down completely before checking the oil.
3. Locate the Dipstick: Open the hood and locate the dipstick, which is typically yellow or orange and has a handle.
4. Pull Out and Wipe: Pull the dipstick out and wipe it clean with a cloth or paper towel.
5. Reinsert and Check: Reinsert the dipstick fully and then pull it out again. The oil level should be between the “ADD” and “FULL” markings.

What to Do If the Light Reappears

If the oil light reappears after resetting, it’s a sign that there’s a more serious issue. Here are some possible causes:

• Oil Leak: A leak in your engine or oil pan can cause the oil level to drop.
• Oil Consumption: Some engines are prone to consuming oil, especially as they age.
• Faulty Oil Sensor: A malfunctioning oil level sensor can trigger the light even if the oil level is adequate.

In these cases, it’s crucial to consult a qualified mechanic to diagnose and repair the problem.

Beyond the Reset: Maintaining Your Dodge Journey’s Engine

Resetting the oil light is just one part of maintaining your Dodge Journey‘s engine. Regular oil changes are crucial:

• Follow the Manufacturer’s Recommendations: Consult your owner’s manual for the recommended oil change intervals for your specific model.
• Use the Correct Oil: Use the type and viscosity of oil specified in your owner’s manual.
• Check for Leaks: Regularly inspect your engine for any signs of oil leaks.

A Final Note: Understanding Your Vehicle

Knowing how to reset your oil light is a valuable skill for any Dodge Journey 2017 owner. However, it’s important to remember that it’s just a temporary fix. If your oil light is on, it’s a sign that something needs attention.

By understanding the reasons behind the light and taking proactive steps to maintain your vehicle, you can ensure a long and trouble-free driving experience with your Dodge Journey.

What People Want to Know

1. How often should I change the oil in my Dodge Journey 2017?

The recommended oil change interval for your Dodge Journey 2017 will vary depending on your driving habits and the type of oil you use. However, it’s generally recommended to change the oil every 5,000-7,500 miles or every six months, whichever comes first.

2. Can I reset the oil light myself?

Yes, you can reset the oil light yourself by following the steps outlined above. However, if the oil light comes on, it’s essential to address the underlying issue before resetting it.

3. What happens if I don’t reset the oil light?

If you don’t reset the oil light, it will continue to flash or stay on, which can be distracting. However, it won’t affect the performance of your vehicle.

4. Can I use any type of oil in my Dodge Journey 2017?

No, it’s important to use the type and viscosity of oil specified in your owner’s manual. Using the wrong oil can damage your engine.

5. What are the signs of a bad oil sensor?

A bad oil sensor can cause the oil light to come on intermittently or even stay on constantly, even if the oil level is adequate. If you suspect that your oil sensor is faulty, it’s best to have it inspected by a mechanic.