Shocking Secrets to Easily Change a 2013 Dodge Durango Key Fob Battery!
What To Know
- Don’t worry, replacing the battery is a simple DIY task that can save you a trip to the dealership.
- The battery compartment on your 2013 Dodge Durango key fob is typically located on the back of the fob.
- Changing the battery in your 2013 Dodge Durango key fob is a straightforward task that can save you time and money.
Are you tired of your 2013 Dodge Durango key fob‘s weak signal and flashing lights? It’s a common issue, and the culprit is often a dying battery. Don’t worry, replacing the battery is a simple DIY task that can save you a trip to the dealership. This guide will walk you through the process step-by-step, so you can get your key fob back in working order in no time.
Gather Your Supplies
Before you start, make sure you have the following items:
- A new CR2032 battery: This is the standard battery used in most car key fobs. You can find them at most electronics stores, grocery stores, and online retailers.
- A small flathead screwdriver: This will be used to pry open the key fob.
- A pair of tweezers (optional): These can be helpful for removing the old battery.
Locate the Battery Compartment
The battery compartment on your 2013 Dodge Durango key fob is typically located on the back of the fob. It might be concealed by a small cover or a seam. Look for a small groove or a release button that you can press to open the compartment.
Remove the Battery Cover
Once you’ve located the battery compartment, gently pry open the cover using your flathead screwdriver. Be careful not to apply too much force, as you don’t want to damage the key fob.
Remove the Old Battery
Inside the compartment, you’ll find the old battery. It should be a small, round battery with a “+” and “-” symbol on it. Use your fingers or tweezers to carefully remove the old battery.
Insert the New Battery
Take the new CR2032 battery and align it with the “+” and “-” markings inside the battery compartment. Gently push the new battery into place until it clicks securely.
Replace the Battery Cover
Once the new battery is in place, carefully close the battery cover. Make sure it snaps shut securely.
Test the Key Fob
Now it’s time to test your key fob. Press the lock, unlock, and panic buttons to make sure they are working properly. If everything is functioning correctly, you’re all set!
Troubleshooting Tips
If your key fob still isn’t working after replacing the battery, here are a few troubleshooting tips:
- Check the battery polarity: Make sure the new battery is installed with the correct polarity. The “+” and “-” symbols on the battery should match the markings inside the compartment.
- Clean the battery contacts: If the battery contacts are dirty, they might not be making a good connection. Use a cotton swab dipped in rubbing alcohol to clean the contacts.
- Reset the key fob: Some key fobs need to be reset after replacing the battery. Consult your owner’s manual for instructions on how to reset your specific key fob.
- Contact a mechanic: If you’ve tried all of the troubleshooting steps and your key fob still isn’t working, it might be time to contact a mechanic. They can diagnose the problem and make any necessary repairs.
Time to Get Back on the Road
Changing the battery in your 2013 Dodge Durango key fob is a straightforward task that can save you time and money. By following these simple steps, you can get your key fob back in working order and back on the road in no time.
Key Fob Battery Life & Maintenance
While you’ve successfully replaced the battery, it’s also important to understand how to extend its life and prevent future issues. Here’s what you can do:
- Avoid Extreme Temperatures: Heat and cold can significantly affect battery life. Try to keep your key fob away from direct sunlight or extreme cold.
- Minimize Button Presses: Excessive use of the key fob buttons can drain the battery faster. Use your key fob sparingly and explore alternative methods for locking/unlocking your vehicle when possible.
- Store Properly: When not in use, it’s best to store your key fob in a cool, dry place to preserve battery life.
Frequently Asked Questions
Q: How often should I replace the key fob battery?
A: The battery life of a key fob can vary depending on usage and environmental factors. On average, you should expect to replace the battery every 1-2 years.
Q: What if I can’t find the battery compartment?
A: If you’re having trouble locating the battery compartment, refer to your vehicle’s owner’s manual or contact your local dealership for assistance.
Q: Can I use a different type of battery?
A: It’s not recommended to use a different type of battery in your key fob. Using the wrong battery can damage the key fob and void the warranty.
Q: What happens if I keep using a dead battery?
A: Using a dead battery can eventually damage the key fob‘s internal circuitry. It’s best to replace the battery as soon as you notice a decrease in range or functionality.
Q: Can I program the key fob myself after replacing the battery?
A: In most cases, you won’t need to reprogram the key fob after replacing the battery. However, if you’re experiencing issues with the key fob’s functionality, you might need to reprogram it. Consult your owner’s manual or contact your local dealership for instructions on how to reprogram your specific key fob.