Unlock the Secret: How to Change Armada Key Fob Battery
What To Know
- Don’t worry, replacing the key fob battery is a simple task that can be done in a few minutes.
- While replacing the battery is a simple fix, you can also take steps to prolong the life of your key fob battery.
- However, if you’re uncomfortable with the process or have any concerns, you can always take your key fob to a Nissan dealership or a qualified mechanic.
Ever found yourself in a frustrating situation where your Nissan Armada‘s key fob just wouldn’t respond? You press the unlock button, and nothing happens. The dreaded “dead battery” scenario. Don’t worry, replacing the key fob battery is a simple task that can be done in a few minutes. This guide will walk you through the process of changing your Armada key fob battery, step-by-step.
Identifying the Battery Type
Before you start, you’ll need to know the type of battery your Armada key fob uses. Most Armada key fobs utilize a CR2032 battery, a common type of lithium coin cell battery. You can find this information in your Armada’s owner’s manual or by checking the back of your key fob.
Gathering Your Supplies
Before you embark on this simple but crucial task, ensure you have the following:
- New CR2032 battery: Ensure you purchase a fresh, high-quality battery from a reputable source.
- Small screwdriver: A small flathead screwdriver will be needed to open the key fob.
- Optional: Tweezers: Tweezers can be helpful for removing the old battery.
Opening the Key Fob
Now, let’s open up the key fob to access the battery compartment.
1. Locate the seam: Carefully examine the key fob. You’ll find a seam or a small groove running around the perimeter of the fob.
2. Insert screwdriver: Gently insert the tip of your screwdriver into the seam.
3. Pry open: Apply gentle, but firm pressure to pry the key fob apart. Be careful not to apply too much force, as you don’t want to damage the fob.
4. Separate the halves: Once you’ve pried open the seam, the key fob should separate into two halves.
Replacing the Battery
Now that you’ve opened the key fob, you can replace the battery:
1. Remove the old battery: The old battery will be visible inside the key fob. Use your fingers or tweezers to gently remove it.
2. Insert the new battery: Carefully insert the new CR2032 battery, ensuring the positive (+) side faces upwards.
3. Close the key fob: Gently snap the two halves of the key fob back together. You should hear a click when the halves are properly aligned.
Testing the New Battery
With the new battery in place, it’s time to check if it’s working:
1. Press the buttons: Press the unlock, lock, and panic buttons on your key fob.
2. Observe the response: If the key fob is functioning correctly, you should hear the car’s alarm chirp or see the headlights flash.
Tips for Extending Battery Life
While replacing the battery is a simple fix, you can also take steps to prolong the life of your key fob battery:
- Avoid extreme temperatures: Heat and cold can significantly impact battery life. Keep your key fob out of direct sunlight or extreme cold.
- Minimize button presses: Every time you press a button on your key fob, you’re using a bit of battery power. Avoid unnecessary button presses.
- Store it properly: When not in use, store your key fob in a cool, dry place.
Time to Hit the Road!
And there you have it! By following these simple steps, you’ve successfully replaced your Armada key fob battery. Now you can confidently unlock your vehicle and hit the road, knowing that your key fob is ready to go.
Common Questions and Answers
Q: How often should I replace my Armada key fob battery?
A: The average lifespan of a CR2032 battery is about 3-5 years. However, this can vary depending on usage and storage conditions. If you notice your key fob becoming unresponsive, it’s time to replace the battery.
Q: What happens if I use a different type of battery?
A: Using a different type of battery can damage your key fob and void your warranty. Always use the recommended CR2032 battery for your Armada key fob.
Q: Can I replace the battery myself, or should I take it to a dealership?
A: Replacing the key fob battery is a straightforward task that can be done at home. However, if you’re uncomfortable with the process or have any concerns, you can always take your key fob to a Nissan dealership or a qualified mechanic.
Q: What should I do if my key fob still doesn’t work after replacing the battery?
A: If your key fob still doesn’t work after replacing the battery, there could be other issues, such as a faulty key fob or a problem with the car’s receiver. Contact a Nissan dealership or a qualified mechanic for assistance.