Gearhead insights, straight from Noah's mind.
Knowledge

Unlock the Secret: How to Change Key Fob Battery 2015 Ford Explorer Like a Pro!

Noah is a passionate car enthusiast and the author behind NoahThoughts.net, a blog dedicated to providing insightful car guides, knowledge, and helpful tips for drivers of all levels. His writing aims to empower readers with the information they need to confidently navigate the world of automobiles.

What To Know

  • Fortunately, changing the battery in your 2015 Ford Explorer key fob is a simple process that can be done in just a few minutes.
  • This guide will walk you through the steps, making it easy for you to replace the battery and get your key fob working again.
  • You won’t be able to unlock your car, start the engine, or use any of the other features that rely on the key fob.

Is your 2015 Ford Explorer key fob struggling to unlock your doors? Or maybe the range is getting shorter, and you have to be right next to the vehicle to make it work? If you’re experiencing these issues, it’s likely that your key fob battery is running low.

Fortunately, changing the battery in your 2015 Ford Explorer key fob is a simple process that can be done in just a few minutes. This guide will walk you through the steps, making it easy for you to replace the battery and get your key fob working again.

What You’ll Need

Before you begin, gather the following materials:

  • A new CR2032 battery: This is the standard battery used in most key fobs, including the 2015 Ford Explorer.
  • A small flathead screwdriver: You’ll need this to pry open the key fob.
  • A small coin: This can be helpful for pushing the battery release button.

Step 1: Locate the Battery Compartment

The battery compartment is located on the back of the key fob. You’ll see a small seam or groove running around the perimeter.

Step 2: Open the Key Fob

Using your flathead screwdriver, gently pry open the key fob along the seam. You may need to apply a little pressure, but be careful not to damage the plastic.

Step 3: Remove the Old Battery

Once the key fob is open, you’ll see the old battery inside. The battery is held in place by a small metal spring. Carefully remove the old battery.

Step 4: Insert the New Battery

Take your new CR2032 battery and align the positive (+) side with the positive terminal inside the key fob. Gently push the battery into place until it clicks.

Step 5: Close the Key Fob

Once the new battery is in place, carefully close the key fob. Make sure the two halves snap together securely.

Step 6: Test the Key Fob

Now it’s time to test your key fob. Press the unlock button and see if your car responds. If it does, you’ve successfully replaced the battery!

Important Considerations

  • Battery Disposal: Dispose of your old battery properly. They contain hazardous materials and should not be thrown in the trash. Many retailers have battery recycling programs.
  • Battery Life: A new CR2032 battery can last for several months to a year depending on usage.
  • Key Fob Programming: If your key fob is not working after replacing the battery, it may need to be reprogrammed.

A Few Tips to Extend Your Key Fob Battery Life

  • Keep the key fob away from extreme temperatures: Heat and cold can shorten the lifespan of your battery.
  • Avoid dropping the key fob: Dropping your key fob can damage the battery or its connections.
  • Turn off the key fob when not in use: This will help conserve battery power.

Final Thoughts – Key Fob Battery Replacement Success!

Congratulations! You’ve successfully replaced the battery in your 2015 Ford Explorer key fob. You can now enjoy the convenience of a fully functional remote entry system. Remember to check your key fob’s battery periodically to avoid any future inconveniences.

Popular Questions

Q: How often should I replace the key fob battery?

A: The battery life of a key fob can vary depending on usage. However, it’s generally recommended to replace the battery every 12-18 months.

Q: What happens if I don’t replace the key fob battery?

A: If you don’t replace the battery, your key fob will eventually stop working. You won’t be able to unlock your car, start the engine, or use any of the other features that rely on the key fob.

Q: Can I use a different type of battery in my key fob?

A: No, you should only use a CR2032 battery in your 2015 Ford Explorer key fob. Using a different type of battery can damage the key fob or cause it to malfunction.

Q: My key fob is still not working after replacing the battery. What should I do?

A: If your key fob is still not working after replacing the battery, it may need to be reprogrammed. You can take your key fob to a Ford dealership or a qualified locksmith to have it reprogrammed.

Was this page helpful?

Noah

Noah is a passionate car enthusiast and the author behind NoahThoughts.net, a blog dedicated to providing insightful car guides, knowledge, and helpful tips for drivers of all levels. His writing aims to empower readers with the information they need to confidently navigate the world of automobiles.

Popular Posts:

Leave a Reply / Feedback

Your email address will not be published. Required fields are marked *

Back to top button