Unlock the Secret: How to Change Key Fob Battery 2017 Chevy Cruze
What To Know
- Changing the battery in your key fob is a simple task that can be done in just a few minutes.
- This guide will walk you through the process of how to change key fob battery 2017 Chevy Cruze, providing clear instructions and helpful tips to ensure a smooth and successful replacement.
- It’s usually located on the back of the key fob, and it will have a small seam or a release button.
The dreaded “low battery” symbol on your 2017 Chevy Cruze key fob can be a frustrating experience. It means you’re about to lose the convenience of keyless entry and remote start, and you might even be stuck fumbling with your physical key to unlock your car. But don’t despair! Changing the battery in your key fob is a simple task that can be done in just a few minutes.
This guide will walk you through the process of how to change key fob battery 2017 Chevy Cruze, providing clear instructions and helpful tips to ensure a smooth and successful replacement.
Gather Your Supplies
Before you begin, make sure you have the following items:
- A new CR2032 battery: This is the standard battery type used in most 2017 Chevy Cruze key fobs. You can find these at most convenience stores, drugstores, and online retailers.
- A small flathead screwdriver: This will be used to pry open the key fob.
- A clean cloth: This will be used to wipe down the key fob after you’ve replaced the battery.
Locate the Battery Compartment
The first step is to locate the battery compartment on your 2017 Chevy Cruze key fob. It’s usually located on the back of the key fob, and it will have a small seam or a release button.
- For key fobs with a seam: Gently pry open the seam using your flathead screwdriver.
- For key fobs with a release button: Press the release button to open the compartment.
Remove the Old Battery
Once you’ve opened the battery compartment, you’ll see the old battery sitting inside. To remove it, gently lift it out of the compartment.
Insert the New Battery
Now it’s time to insert the new battery. Make sure the positive (+) side of the battery is facing upwards. Carefully slide the new battery into the compartment, making sure it sits flush with the contacts.
Close the Battery Compartment
Once the new battery is in place, close the battery compartment. Make sure it clicks shut securely.
Test the Key Fob
Now it’s time to test your key fob. Press the unlock button, the lock button, and the panic button. If the key fob is working properly, you should hear the car respond. If not, double-check that the new battery is properly inserted and that the battery compartment is closed securely.
Additional Tips for Key Fob Battery Replacement
- Battery life: CR2032 batteries typically last for 1-2 years, but this can vary depending on how often you use your key fob.
- Recycling: Dispose of your old battery properly by recycling it.
- Cleaning: While you have the key fob open, use a clean cloth to wipe away any dirt or debris that may have accumulated inside.
Key Fob Programming (If Necessary)
In some cases, you may need to reprogram your key fob after replacing the battery. This is typically only necessary if you’ve replaced the battery in a key fob that was previously programmed to your car.
To reprogram your key fob, follow these steps:
1. Open the driver’s side door: This will allow you to access the ignition.
2. Insert the key into the ignition: Turn the key to the “on” position, but do not start the engine.
3. Press and hold the unlock button on your key fob: Continue holding the button for about 10 seconds.
4. Turn the key to the “off” position: Once you see the lights on your dashboard turn off, you can release the unlock button.
5. Test your key fob: Press the unlock button, the lock button, and the panic button to make sure it’s working properly.
Maintaining Your Key Fob
To keep your key fob working properly and avoid premature battery drain, here are a few tips:
- Avoid extreme temperatures: Don’t leave your key fob in direct sunlight or in extremely cold temperatures.
- Keep it dry: If your key fob gets wet, dry it off immediately.
- Avoid dropping it: Dropping your key fob can damage the internal components, including the battery contacts.
A Final Note on Battery Replacement
Replacing your 2017 Chevy Cruze key fob battery is a straightforward process that can be done by anyone. By following these steps, you can ensure a smooth and successful battery replacement, keeping your key fob working flawlessly.
Common Questions and Answers
Q: How long does a CR2032 battery last in a 2017 Chevy Cruze key fob?
A: A CR2032 battery typically lasts for 1-2 years in a 2017 Chevy Cruze key fob, but this can vary depending on usage.
Q: Can I use a different type of battery in my key fob?
A: No, it’s important to use a CR2032 battery as it’s the specific type designed for your 2017 Chevy Cruze key fob. Using a different type of battery could damage your key fob.
Q: What should I do if my key fob still doesn’t work after replacing the battery?
A: If your key fob still doesn’t work after replacing the battery, it’s possible that the battery contacts are dirty or that the key fob itself is damaged. You can try cleaning the battery contacts with a cotton swab dipped in rubbing alcohol. If that doesn’t work, you’ll need to take your key fob to a dealership or a qualified auto locksmith for repair.
Q: Can I reprogram my key fob myself?
A: You can reprogram your key fob yourself, but it’s a bit more complicated than just replacing the battery. You’ll need to follow the specific instructions for your 2017 Chevy Cruze model, which can be found in your owner’s manual or online.
Q: How often should I check my key fob battery?
A: It’s a good idea to check your key fob battery every 6-12 months, or sooner if you notice any signs of low battery life, such as the “low battery” symbol on your key fob or a decrease in the range of your key fob.