Never Get Locked Out Again: How to Change Key Fob Battery 2017 Ford Edge
What To Know
- You’ll find the battery compartment on the back of the key fob.
- Make sure the positive (+) side of the battery faces up, towards the top of the key fob.
- It’s a good idea to check the battery life every few months, especially if you notice the key fob range decreasing.
Are you experiencing a frustratingly short range for your 2017 Ford Edge key fob? Is the “low battery” icon blinking ominously on your dashboard? It’s time to change the battery in your key fob! This guide will walk you through the process, making it simple and straightforward.
Gather Your Supplies
Before you begin, ensure you have the following:
- A new CR2032 battery: This is the standard battery used in most car key fobs. You can find these at most convenience stores, electronics stores, or online. Make sure to purchase a high-quality battery for optimal performance.
- A small flathead screwdriver or a coin: This will be used to pry open the key fob.
- A clean cloth or paper towel: This will help you keep the key fob clean during the process.
Locate the Battery Compartment
- Flip the key fob over: You’ll find the battery compartment on the back of the key fob.
- Look for a small release tab: This tab might be a small button, a groove, or a small notch. It will be located somewhere near the back of the key fob.
- Carefully pry open the key fob: Use your flathead screwdriver or coin to gently pry open the battery compartment. Be careful not to apply too much force, as this could damage the key fob.
Remove the Old Battery
- Locate the old battery: The battery will be inside the compartment, usually held in place by a small spring.
- Remove the old battery: Gently lift the battery out of the compartment. Be careful not to touch the battery terminals, as this can cause a short circuit.
Insert the New Battery
- Align the new battery: Make sure the positive (+) side of the battery faces up, towards the top of the key fob. The negative (-) side should face down.
- Insert the new battery: Carefully slide the new battery into the compartment. Make sure it sits flush with the compartment and that the spring is holding it in place.
Close the Key Fob
- Align the key fob halves: Carefully align the two halves of the key fob.
- Press the halves together: Gently press the two halves of the key fob together until they are securely locked. You should hear a click when the key fob is closed.
Test the Key Fob
- Press the buttons: Test the key fob by pressing the unlock, lock, and trunk release buttons. If the buttons work, you’ve successfully changed the battery.
- Test the key fob range: Walk away from your car and test the range of the key fob. It should unlock and lock the doors from a reasonable distance.
Additional Tips
- Dispose of the old battery properly: Batteries contain hazardous materials, so it’s important to dispose of them properly. Check with your local waste disposal company for instructions on how to dispose of batteries.
- Keep the battery compartment clean: Clean the battery compartment with a dry cloth or paper towel to remove any dirt or debris. This will help to ensure that the battery contacts are clean and that the key fob works properly.
- Check the battery life: The battery life of a CR2032 battery can vary depending on usage. It’s a good idea to check the battery life every few months, especially if you notice the key fob range decreasing.
Troubleshooting
If your key fob still doesn’t work after changing the battery, there are a few things you can try:
- Check the battery contacts: Make sure the battery contacts are clean and free of corrosion. You can use a cotton swab dipped in rubbing alcohol to clean the contacts.
- Re-sync the key fob: Some car models require you to re-sync the key fob after changing the battery. Check your owner’s manual for instructions on how to re-sync the key fob.
- Take it to a mechanic: If you’re still having trouble, it’s best to take your car to a mechanic to have the key fob checked.
A Final Word on Changing Key Fob Batteries
Changing the battery in your 2017 Ford Edge key fob is a simple and straightforward process. By following these steps, you can easily replace the battery and get your key fob working again.
Top Questions Asked
Q: How often should I change the battery in my key fob?
A: The battery life of a CR2032 battery can vary depending on usage, but it’s generally recommended to change the battery every 1-2 years.
Q: What if I accidentally put the battery in backwards?
A: If you put the battery in backwards, it won’t work. Simply remove the battery and re-insert it with the positive (+) side facing up.
Q: Can I use a different type of battery?
A: It’s not recommended to use a different type of battery, as this could damage the key fob. The CR2032 battery is specifically designed for car key fobs.
Q: What if the key fob still doesn’t work after changing the battery?
A: If the key fob still doesn’t work after changing the battery, there could be a problem with the key fob itself. You can try re-syncing the key fob or taking it to a mechanic to have it checked.
Q: How do I know if my key fob is working properly?
A: You can test the key fob by pressing the unlock, lock, and trunk release buttons. If the buttons work, and the key fob unlocks and locks the doors from a reasonable distance, then it’s working properly.