Essential DIY: How to Change Key Fob Battery 2019 Dodge Durango in Minutes

Do you own a 2019 Dodge Durango and find yourself struggling with a malfunctioning key fob? Is the range of your key fob suddenly shorter, or are you having trouble unlocking your vehicle? The culprit could be a dead battery in your key fob. Don’t worry, replacing the battery is a simple task that you can easily do yourself. This guide will walk you through the process of how to change key fob battery 2019 Dodge Durango step-by-step.

Gather Your Supplies

Before you begin, ensure you have the following items:

• A new CR2032 battery: This is the type of battery used in the 2019 Dodge Durango key fob. You can find these at most electronics stores, grocery stores, and online retailers.
• A small flathead screwdriver: This will be needed to pry open the key fob.

Locate the Key Fob Battery Compartment

1. Flip the key fob over: Look for a small seam or groove on the back of the key fob. This is where the battery compartment is located.
2. Locate the release button: On the 2019 Dodge Durango key fob, you’ll typically find a small button or a notch near the seam. This button is used to release the battery cover.

Open the Key Fob Battery Compartment

1. Press the release button: Gently press the release button while simultaneously prying the key fob open using your flathead screwdriver. Be careful not to apply excessive force, as this could damage the key fob.
2. Remove the battery cover: Once the release button is pressed, the battery cover should pop open. Carefully remove the cover.

Replace the Battery

1. Remove the old battery: The old battery should be visible in the compartment. Carefully remove it.
2. Insert the new battery: Make sure the positive (+) side of the new battery faces up. Gently place the battery in the compartment.
3. Replace the battery cover: Snap the battery cover back into place.

Test the Key Fob

1. Lock and unlock your vehicle: Press the lock and unlock buttons on the key fob to ensure that it is working correctly.
2. Test the range: Walk away from your vehicle to check the range of the key fob. If the range is still short, you may need to reprogram the key fob.

Reprogramming the Key Fob

If you need to reprogram your key fob, follow these steps:

1. Insert the key into the ignition: Turn the key to the “On” position.
2. Press the lock button: Press and hold the lock button on the key fob for approximately 10 seconds.
3. Release the lock button: Once the doors lock and unlock, release the lock button.
4. Turn the key to the “Off” position: Remove the key from the ignition.
5. Test the key fob: Try locking and unlocking the doors to ensure that the key fob is reprogrammed.

Final Thoughts: Key Fob Battery Replacement Success

Replacing the battery in your 2019 Dodge Durango key fob is a simple and straightforward process. By following these steps, you can easily restore your key fob to working order and avoid the frustration of a dead battery. Remember to always use the correct type of battery, and be careful when prying open the key fob to avoid damage. If you encounter any difficulties, consult your owner’s manual or contact a qualified mechanic.

Frequently Asked Questions

Q: How often should I replace the battery in my key fob?

A: The battery life of a key fob can vary depending on usage and factors like temperature. Typically, a key fob battery lasts for 1-2 years. However, it’s a good idea to keep an eye on the battery performance and replace it if you notice any signs of weakness.

Q: What happens if I use the wrong type of battery?

A: Using the wrong type of battery can damage your key fob. The CR2032 battery is specifically designed for the 2019 Dodge Durango key fob. Using a different type of battery can lead to incorrect voltage and current flow, potentially damaging the key fob’s internal circuitry.

Q: What if I can’t find the release button on my key fob?

A: If you can’t locate the release button, it might be hidden under the key fob‘s logo or emblem. Try gently prying around the edges of the key fob to see if you can find a release point. If you still cannot locate it, consult your owner’s manual or contact a dealership for assistance.

Q: What if my key fob still doesn’t work after replacing the battery?

A: If the key fob still doesn’t work after replacing the battery, there could be a more serious issue with the key fob itself or the vehicle’s receiver. It’s best to consult a qualified mechanic or your dealership for diagnosis and repair.