Battery Dying? How to Change Key Fob Battery Dodge Durango and Get Back on the Road
What To Know
- The dreaded low battery warning on your Dodge Durango key fob can be a real pain, especially when you’re in a hurry.
- Replacing the battery in your Dodge Durango key fob is a simple task that can save you a lot of frustration.
- If you notice your key fob’s range decreasing or the battery warning light is flashing, it’s time to replace the battery.
The dreaded low battery warning on your Dodge Durango key fob can be a real pain, especially when you’re in a hurry. But don’t panic! Replacing the battery is a quick and easy fix that can be done in just a few minutes. This comprehensive guide will walk you through the process of how to change key fob battery Dodge Durango, ensuring you’re back to unlocking your vehicle with ease.
Tools You’ll Need
Before you start, gather the following tools:
- A small flathead screwdriver or a coin: This will be used to pry open the key fob.
- A new CR2032 battery: This is the standard battery used in most Dodge Durango key fobs.
Step-by-Step Guide to Replacing Your Dodge Durango Key Fob Battery
1. Locate the Battery Compartment: The battery compartment on your Dodge Durango key fob is usually located on the back side. You might find a small seam or a release button.
2. Open the Key Fob: Use your flathead screwdriver or coin to gently pry open the key fob. Start at the seam and work your way around the edges until the two halves separate.
3. Remove the Old Battery: Once the key fob is open, you’ll see the old battery. Carefully remove it by gently lifting it out.
4. Insert the New Battery: Take your new CR2032 battery and align the positive (+) side with the positive terminal inside the key fob. Gently press the battery in until it clicks into place.
5. Close the Key Fob: Carefully snap the two halves of the key fob back together. Ensure that the edges are properly aligned and that the key fob closes securely.
Tips for Success
- Be gentle: When prying open the key fob, use a firm but gentle pressure to avoid damaging the plastic casing.
- Proper disposal: Dispose of the old battery responsibly by recycling it or following local guidelines.
- Test your key fob: Once you’ve replaced the battery, test the key fob by pressing the buttons. Make sure that the lights are working and that the remote functions are operational.
Troubleshooting
If you’re having trouble replacing the battery or if your key fob still isn’t working after replacing the battery, here are some common troubleshooting tips:
- Check the battery: Make sure you’ve inserted the new battery correctly with the positive (+) side facing up. Try a different battery if you suspect the new one is faulty.
- Clean the battery contacts: If the battery contacts are dirty, they may be preventing a proper connection. Clean the contacts with a soft cloth or a cotton swab dipped in rubbing alcohol.
- Reset your key fob: Some Dodge Durango key fobs can be reset by holding down the lock and unlock buttons simultaneously for a few seconds.
Extending Your Key Fob Battery Life
Here are some useful tips to help you extend the battery life of your Dodge Durango key fob:
- Avoid extreme temperatures: Heat and cold can affect the battery life of your key fob. Keep it away from direct sunlight, extreme heat, and freezing temperatures.
- Minimize button presses: Only use the key fob when necessary. Avoid pressing the buttons repeatedly or holding them down for extended periods.
- Turn off the key fob’s LED light: Some key fobs have an LED light that illuminates when a button is pressed. If you don’t need the light, you can turn it off to conserve battery power.
The Final Word: Keeping Your Dodge Durango Key Fob in Tip-Top Shape
Replacing the battery in your Dodge Durango key fob is a simple task that can save you a lot of frustration. By following these easy steps and keeping the battery in good condition, you can ensure that your key fob works reliably for years to come.
Top Questions Asked
Q: How often should I replace the battery in my Dodge Durango key fob?
A: The battery life of a key fob can vary depending on usage and environmental factors. However, most key fobs last for about 1-2 years. If you notice your key fob’s range decreasing or the battery warning light is flashing, it’s time to replace the battery.
Q: Can I use any CR2032 battery for my Dodge Durango key fob?
A: While CR2032 batteries are generally compatible, it’s recommended to use a high-quality battery from a reputable brand. Using a low-quality battery can shorten the lifespan of your key fob and may even damage it.
Q: What should I do if my Dodge Durango key fob is still not working after replacing the battery?
A: If you’ve replaced the battery and your key fob is still not working, it’s possible that the battery contacts are dirty, the key fob itself is damaged, or there’s a problem with the vehicle’s receiving system. You can try cleaning the battery contacts or resetting the key fob. If the problem persists, it’s best to consult a qualified mechanic or Dodge dealership.