Step-by-Step Guide: How to Change Key Fob Battery Ford Escape 2019 Like a Pro!

Are you experiencing the dreaded “low battery” warning on your Ford Escape 2019 key fob? It’s a common issue, and thankfully, replacing the battery is a simple DIY task. This guide will walk you through the process of changing the key fob battery in your Ford Escape 2019, step-by-step.

Gather Your Supplies

Before you begin, make sure you have the following:

• A new CR2032 battery: This is the standard battery used in most Ford Escape 2019 key fobs.
• A small flathead screwdriver: You’ll need this to pry open the key fob.
• A clean, dry cloth: This is helpful for wiping away any dust or debris.

Locate the Battery Compartment

The battery compartment is usually located on the back of the key fob. It might be concealed by a small metal or plastic cover.

• Identify the Cover: Look for a seam or a small release button on the back of the key fob. This is where the cover is located.
• Remove the Cover: Use your flathead screwdriver to gently pry open the cover. Be careful not to damage the key fob.

Remove the Old Battery

Once you’ve opened the battery compartment, you’ll see the old battery.

• Locate the Battery: The battery is usually held in place by a small metal spring or a clip.
• Remove the Battery: Carefully pry the old battery out of its holder. Dispose of the old battery properly.

Install the New Battery

Now that the old battery is out, it’s time to install the new one.

• Insert the Battery: Carefully place the new CR2032 battery into the battery compartment, making sure the positive (+) side faces up.
• Secure the Battery: If there’s a spring or clip, make sure the battery is securely held in place.
• Close the Cover: Gently close the battery compartment cover.

Test the Key Fob

Once the new battery is installed, it’s time to test the key fob.

• Press the Buttons: Press the lock, unlock, and panic buttons to make sure they are working.
• Test the Remote Start: If your key fob has remote start functionality, test it to ensure it works.

Troubleshooting

If the key fob still doesn’t work after replacing the battery, here are a few things to check:

• Battery Orientation: Make sure the new battery is inserted correctly, with the positive (+) side facing up.
• Battery Contact: Ensure the battery is making good contact with the battery terminals.
• Key Fob Damage: Check for any visible damage to the key fob, such as cracks or broken buttons.
• Programming: If the key fob is still not working, it might need to be reprogrammed. Consult your owner’s manual or a Ford dealership for instructions.

Additional Tips

• Battery Life: CR2032 batteries typically last for 2-3 years.
• Store Batteries Properly: Store your spare batteries in a cool, dry place to preserve their lifespan.
• Regular Maintenance: Regularly check the battery level of your key fob to avoid getting stuck with a dead battery.

Key Fob Battery Replacement: A Final Thought

Replacing the key fob battery in your Ford Escape 2019 is a simple process that can save you a lot of hassle. By following these steps, you can ensure that your key fob is always ready to go.

Answers to Your Most Common Questions

Q: How long does it take to replace the key fob battery?

A: The entire process takes about 5-10 minutes, depending on your familiarity with the procedure.

Q: What happens if I use the wrong type of battery?

A: Using the wrong type of battery can damage your key fob. Always use a CR2032 battery.

Q: Can I use a rechargeable battery?

A: Rechargeable batteries are not recommended for key fobs, as they may not provide enough power or may damage the key fob circuitry.

Q: Where can I buy a replacement battery?

A: CR2032 batteries are widely available at most electronics stores, supermarkets, and online retailers.

Q: What should I do if I can’t get the key fob cover open?

A: If you’re having trouble opening the cover, try using a different screwdriver or a thin piece of plastic. If you’re still having trouble, consult a Ford dealership or a qualified mechanic.