Discover the Easy Steps for a Ford Explorer 2016 Key Fob Battery Change!
What To Know
- This guide will walk you through the process of changing your key fob battery, so you can get back on the road in no time.
- Your Ford Explorer 2016 key fob will have a small seam or a release button on one side.
- Use a soft cloth or a cotton swab to clean any dirt or debris from the battery contacts inside the key fob.
Losing the ability to unlock your Ford Explorer 2016 can be frustrating, especially if you’re caught in a hurry. A dead key fob battery is a common culprit, but it’s an easy fix. This guide will walk you through the process of changing your key fob battery, so you can get back on the road in no time.
Why Your Key Fob Battery Might Die
Before we dive into the steps, let’s understand why your key fob battery might be losing its juice. Here are some common reasons:
- Battery Age: Like any battery, the one in your key fob has a limited lifespan. Over time, it loses its charge and needs to be replaced.
- Frequent Use: If you use your key fob frequently, it’s putting a strain on the battery, leading to faster depletion.
- Extreme Temperatures: Heat and cold can affect battery life. Leaving your key fob in direct sunlight or in a very cold environment can shorten its lifespan.
- Battery Leakage: In some cases, the battery might leak, damaging the fob’s internal components.
Tools You’ll Need
Before you start, make sure you have these tools handy:
- A small flathead screwdriver: This is essential for prying open the key fob.
- A new CR2032 battery: This is the standard battery used in most Ford Explorer 2016 key fobs.
Step-by-Step Guide: Changing Your Key Fob Battery
Now, let’s get to the process of changing your key fob battery:
1. Locate the Battery Compartment: Your Ford Explorer 2016 key fob will have a small seam or a release button on one side. This is where the battery compartment is located.
2. Open the Key Fob: Use your flathead screwdriver to gently pry open the key fob along the seam or release button. Be careful not to force it open, as you might damage the fob.
3. Remove the Old Battery: Inside the compartment, you’ll find the old battery. It will be held in place by a small spring or clip. Carefully remove the old battery.
4. Insert the New Battery: Take the new CR2032 battery and align it correctly with the positive (+) and negative (-) terminals inside the compartment. The battery should slide into place easily.
5. Close the Key Fob: Carefully close the key fob, making sure it snaps shut securely.
6. Test the Key Fob: Press the lock, unlock, and panic buttons on your key fob to ensure it’s working correctly.
Troubleshooting Tips
If your key fob still isn’t working after replacing the battery, here are some troubleshooting tips:
- Check the Battery: Make sure you have the correct battery type (CR2032) and that it’s properly installed.
- Clean the Battery Contacts: Use a soft cloth or a cotton swab to clean any dirt or debris from the battery contacts inside the key fob.
- Reset the Key Fob: Some Ford Explorers have a reset procedure for the key fob. Consult your owner’s manual for instructions.
- Check the Key Fob’s Range: Move closer to your vehicle to see if the signal improves.
Maintaining Your Key Fob Battery
Here are some simple tips to maintain your key fob battery and extend its lifespan:
- Avoid Extreme Temperatures: Store your key fob in a cool, dry place to prevent battery damage.
- Reduce Key Fob Use: Try to use your key fob sparingly, especially for frequent locking and unlocking.
- Replace the Battery Regularly: Even if your key fob is still working, consider replacing the battery every 1-2 years to ensure optimal performance.
Your Key Fob Is Back in Action: Enjoy the Ride
Now that you’ve successfully changed your key fob battery, you can unlock your Ford Explorer 2016 with ease. Remember to keep these tips in mind to prevent future battery issues. Drive safe!
What You Need to Know
Q: What kind of battery does a Ford Explorer 2016 key fob use?
A: A Ford Explorer 2016 key fob typically uses a CR2032 battery.
Q: How long does a key fob battery last?
A: The lifespan of a key fob battery varies depending on usage and environmental factors. On average, it can last anywhere from 1 to 2 years.
Q: Can I replace the battery myself?
A: Yes, you can easily replace the battery yourself with a small flathead screwdriver and a new CR2032 battery.
Q: What if my key fob still doesn’t work after replacing the battery?
A: If the key fob still doesn’t work, try cleaning the battery contacts, resetting the key fob, or checking the key fob’s range. If the problem persists, you may need to consult a professional.