Say Goodbye to Battery Troubles: How to Change Key Fob Battery in 2019 Hyundai Santa Fe
What To Know
- This guide will walk you through the process of changing the key fob battery in your 2019 Hyundai Santa Fe, making sure you’re back to enjoying seamless access to your vehicle in no time.
- The key fob for your 2019 Hyundai Santa Fe has a small button on the side for unlocking the doors.
- Replacing the battery in your 2019 Hyundai Santa Fe key fob is a simple task that you can do yourself.
Are you experiencing a frustratingly short range with your 2019 Hyundai Santa Fe key fob? Does the “key not found” message flash on your dashboard? It’s likely time to replace the battery in your key fob! This guide will walk you through the process of changing the key fob battery in your 2019 Hyundai Santa Fe, making sure you’re back to enjoying seamless access to your vehicle in no time.
Gathering Your Supplies
Before you start, ensure you have the following:
- A new CR2032 battery: This is the standard battery type used in most Hyundai key fobs. You can find these at most electronics stores or online retailers.
- A small flathead screwdriver: This will be used to pry open the key fob.
- A clean cloth: This will help you wipe away any dust or debris from the key fob.
Locate the Battery Compartment
1. Identify the key fob: The key fob for your 2019 Hyundai Santa Fe has a small button on the side for unlocking the doors.
2. Locate the seam: Look for a small seam or gap running around the edge of the key fob. This seam typically runs around the perimeter of the fob.
3. Locate the release button: On the back of the key fob, you’ll find a small, round button. This is the battery compartment release button.
Opening the Key Fob
1. Press the release button: Gently press the release button on the back of the key fob. You may need to apply a bit of pressure.
2. Pry open the key fob: Use your flathead screwdriver to carefully pry open the key fob along the seam you identified earlier. Start at one end and work your way around the key fob. Be gentle to avoid damaging the key fob.
3. Remove the old battery: Once the key fob is open, you’ll see the old battery. Gently remove the battery by pulling it out.
Installing the New Battery
1. Insert the new battery: Carefully insert the new CR2032 battery into the battery compartment, making sure the positive (+) side of the battery faces up.
2. Close the key fob: Once the new battery is in place, gently close the key fob. Ensure that the two halves of the key fob snap together securely.
Testing the Key Fob
1. Press the unlock button: Press the unlock button on your key fob to test if the battery is properly installed. Your car should respond by unlocking.
2. Test other functions: Try using the other buttons on your key fob to ensure all functions are working correctly.
Troubleshooting Tips
If your key fob still isn’t working after replacing the battery, try the following:
- Check the battery’s polarity: Make sure the positive (+) side of the battery is facing up.
- Clean the battery terminals: Use a clean cloth to wipe away any dirt or debris from the battery terminals.
- Reset the key fob: Some Hyundai key fobs require a reset after replacing the battery. Consult your owner’s manual for instructions on how to reset your specific key fob.
- Contact a dealer: If you’ve tried all of the above steps and your key fob still isn’t working, it’s best to contact a Hyundai dealer for assistance.
Final Thoughts: Keeping Your Key Fob in Top Shape
Replacing the battery in your 2019 Hyundai Santa Fe key fob is a simple task that you can do yourself. By following these steps, you can ensure that your key fob is always working properly and that you have easy access to your vehicle.
What You Need to Learn
Q: How often should I replace the battery in my key fob?
A: The battery in your key fob typically lasts for about one to two years. However, this can vary depending on how often you use the key fob. If you notice that your key fob’s range is decreasing or that the battery is draining quickly, it’s time to replace the battery.
Q: What happens if I use a different type of battery?
A: Using a different type of battery can damage your key fob. It’s essential to use a CR2032 battery, as this is the correct size and voltage for your key fob.
Q: How can I tell if my key fob is not working properly?
A: There are a few signs that your key fob might not be working properly. These include:
- Shortened range: If you have to be very close to your car to unlock it, the battery might be dying.
- Intermittent functionality: If the key fob works sometimes but not others, it might be a sign of a dying battery or a faulty key fob.
- No response: If your key fob doesn’t respond at all, the battery might be completely dead.
Q: What should I do if I lose my key fob?
A: If you lose your key fob, you’ll need to contact a Hyundai dealer to have a new key fob programmed. This process typically involves providing proof of ownership and may require you to pay a fee.
Q: Can I program my key fob myself?
A: While some key fobs can be programmed at home, this is not recommended for the 2019 Hyundai Santa Fe. Programming a key fob for this model often requires specialized equipment and knowledge. It’s best to have a Hyundai dealer program a new or replacement key fob to ensure it’s properly linked to your vehicle.