How to Jack Up 5th Gen 4Runner: The Ultimate Guide for Off-Road Enthusiasts
What To Know
- If your 4Runner is equipped with an emergency brake, release it to ensure the parking brake is the only mechanism holding the vehicle.
- Slowly crank the jack handle, lifting the vehicle until it is high enough to remove the wheel or perform the necessary work.
- Carefully lower the jack, ensuring the weight is fully supported by the jack stands before completely removing the jack.
The 5th generation Toyota 4Runner is renowned for its rugged capability and off-road prowess. Whether you’re tackling challenging trails, replacing tires, or performing maintenance, knowing how to properly jack up your 4Runner is essential. This comprehensive guide will walk you through the process step-by-step, ensuring a safe and successful experience.
Gather Your Tools and Equipment
Before you begin, ensure you have the following tools and equipment readily available:
- Jack: A hydraulic floor jack with a lifting capacity of at least 2 tons (4,000 lbs) is recommended.
- Jack Stands: A set of two heavy-duty jack stands with a capacity of at least 3 tons (6,000 lbs) is crucial for safety.
- Lug Wrench: A sturdy lug wrench that fits your 4Runner’s lug nuts is essential for removing and reinstalling the wheels.
- Chocks: Wedge-shaped blocks that prevent the vehicle from rolling are essential for safety.
- Work Gloves: Protect your hands while handling tools and lifting heavy objects.
- Flat Surface: A level, solid surface is critical for safe and stable jacking.
Choosing the Right Jacking Points
The 5th generation 4Runner has designated jacking points located on the vehicle’s frame. Using these points ensures proper weight distribution and prevents damage to the vehicle’s body.
- Front Jacking Points: The front jacking points are located on the frame rails, just behind the front wheels.
- Rear Jacking Points: The rear jacking points are located on the frame rails, just in front of the rear wheels.
Preparing Your 4Runner for Jacking
1. Park on a Level Surface: Ensure your 4Runner is parked on a firm, level surface. This will prevent the vehicle from rolling during the jacking process.
2. Engage the Parking Brake: Apply the parking brake firmly to secure the vehicle.
3. Chock the Wheels: Place chocks behind the opposite wheels to prevent the vehicle from rolling.
4. Release the Emergency Brake: If your 4Runner is equipped with an emergency brake, release it to ensure the parking brake is the only mechanism holding the vehicle.
The Jacking Process
1. Locate the Jacking Point: Identify the appropriate jacking point based on whether you’re working on the front or rear of the vehicle.
2. Position the Jack: Carefully position the jack under the jacking point, ensuring it is centered and stable.
3. Begin Lifting: Slowly crank the jack handle, lifting the vehicle until it is high enough to remove the wheel or perform the necessary work.
4. Use Jack Stands: Once the vehicle is lifted, immediately place the jack stands under the frame, ensuring they are securely positioned and properly engaged.
5. Lower the Jack: Carefully lower the jack, ensuring the weight is fully supported by the jack stands before completely removing the jack.
Performing Maintenance or Replacing Tires
Once your 4Runner is safely lifted and supported by jack stands, you can proceed with the desired task.
- Tire Replacement: Carefully remove the lug nuts using your lug wrench and remove the tire. Install the new tire, ensuring the lug nuts are tightened evenly.
- Other Maintenance: Perform any necessary maintenance tasks, such as brake inspections, oil changes, or suspension work.
Lowering Your 4Runner
1. Remove Jack Stands: Carefully remove the jack stands, ensuring the vehicle is still supported by the jack.
2. Lower the Vehicle: Slowly lower the vehicle using the jack until the tire is touching the ground.
3. Remove the Jack: Once the vehicle is fully on the ground, remove the jack and store it safely.
4. Tighten Lug Nuts: Tighten the lug nuts securely using your lug wrench.
5. Remove Chocks: Carefully remove the chocks from behind the wheels.
Final Safety Considerations
- Never work under a vehicle that is only supported by a jack. Always use jack stands to ensure the vehicle is securely supported.
- Always use the designated jacking points. Using other points can damage the vehicle’s frame.
- Ensure the jack is properly positioned and stable. A poorly positioned jack can slip or fail, resulting in serious injury.
- Be aware of your surroundings. Ensure there are no obstructions or hazards around the vehicle.
- If you are unsure about any part of this process, consult a qualified mechanic.
Beyond the Basics: Tips for Advanced Off-Road Enthusiasts
For off-road enthusiasts who frequently tackle challenging terrain, here are some additional tips:
- Invest in a High-Lift Jack: A high-lift jack provides greater lifting capacity and versatility, making it ideal for off-road situations.
- Consider a Skid Plate: A skid plate protects the underside of your 4Runner from damage caused by rocks and obstacles.
- Learn Proper Recovery Techniques: Knowing how to use a winch, snatch blocks, and other recovery tools is essential for off-roading.
The Last Word: Your 4Runner’s Lifelong Companion
Knowing how to jack up your 5th gen 4Runner is a valuable skill for any owner, whether you’re a casual driver or a seasoned off-road enthusiast. By following these steps, you can ensure a safe and successful experience, allowing you to conquer the terrain with confidence.
Questions We Hear a Lot
Q: What is the proper torque for lug nuts on a 5th gen 4Runner?
A: The recommended torque for lug nuts on a 5th gen 4Runner is 90-100 ft-lbs.
Q: Can I use a scissor jack to jack up my 4Runner?
A: It is not recommended to use a scissor jack on a 4Runner. Scissor jacks are typically designed for smaller vehicles and may not have the capacity to lift a 4Runner safely.
Q: How often should I inspect my jack and jack stands?
A: It is important to inspect your jack and jack stands regularly for damage or wear. At least once a year, or more frequently if you use them often, is recommended.
Q: How do I know if my jack stands are properly engaged?
A: Jack stands should be properly engaged when you hear a distinct “click” or “snap” as the locking mechanism engages. If you don’t hear this sound, the stand may not be properly secured.
Q: What should I do if my jack fails while lifting my 4Runner?
A: If your jack fails while lifting your 4Runner, immediately stop lifting and do not attempt to continue. If possible, use a different jack or contact a qualified mechanic for assistance.