Gearhead insights, straight from Noah's mind.
Knowledge

The Ultimate Guide: How to Jump Start a 2019 Lincoln Nautilus like a Pro

Noah is a passionate car enthusiast and the author behind NoahThoughts.net, a blog dedicated to providing insightful car guides, knowledge, and helpful tips for drivers of all levels. His writing aims to empower readers with the information they need to confidently navigate the world of automobiles.

What To Know

  • Connect the other end of the red cable to the positive (+) terminal of the good battery in the working vehicle.
  • Remove the black cables, starting with the one connected to the grounding point on the Nautilus and then the one connected to the good battery.
  • Remove the red cables, starting with the one connected to the good battery and then the one connected to the dead battery.

The 2019 Lincoln Nautilus is a luxurious and stylish SUV, but like any vehicle, it can fall victim to a dead battery. When this happens, you’ll need to know how to jump start your Nautilus to get back on the road. This guide will walk you through the process, ensuring you can handle this situation with confidence.

Essential Tools and Safety Precautions

Before we dive into the jump-starting process, it’s crucial to gather the necessary tools and understand safety precautions:

  • Jump Start Cables: These are the lifeline of the operation. Ensure you have a set of high-quality cables with heavy-duty clamps.
  • Working Vehicle: You’ll need a vehicle with a fully charged battery to provide the jump start.
  • Safety Glasses: Protect your eyes from potential sparks or battery acid splashes.
  • Gloves: Protect your hands from the battery acid and cold metal.
  • Fire Extinguisher: Keep one handy in case of an unexpected fire.

Safety Precautions:

  • Never attempt to jump start a vehicle with a damaged battery. This can be dangerous and lead to further damage.
  • Avoid touching the battery terminals while the engine is running. The battery produces a high voltage that can cause severe burns.
  • Never connect the jumper cables directly to the battery terminals. Always connect them to the designated jump start points.
  • Do not smoke or use any open flames near the battery. Battery fumes are flammable.

Locating the Battery and Jump Start Points

The first step is to locate your 2019 Lincoln Nautilus‘s battery and jump start points.

  • Battery Location: Open the hood of your Nautilus. The battery is usually located on the passenger side, near the front of the engine compartment. It will be a rectangular box with thick cables connected to it.
  • Jump Start Points: The jump start points are typically located on the battery itself. Look for two large metal posts, often marked with “+” and “-” symbols. These are the positive (+) and negative (-) terminals.

Connecting the Jumper Cables

Now, it’s time to connect the jumper cables, following these steps:

1. Connect the Positive (Red) Cable: Attach the red clamp of the jumper cable to the positive (+) terminal of the dead battery in your Nautilus.
2. Connect the Positive (Red) Cable to the Good Battery: Connect the other end of the red cable to the positive (+) terminal of the good battery in the working vehicle.
3. Connect the Negative (Black) Cable to the Good Battery: Attach the black clamp of the jumper cable to the negative (-) terminal of the good battery.
4. Connect the Negative (Black) Cable to the Ground: Connect the other end of the black cable to a solid metal grounding point on the 2019 Lincoln Nautilus’s frame. This is usually a bolt or a metal bracket. Avoid connecting it directly to the battery.

Starting the Vehicles

With the cables connected, you’re ready to start the vehicles:

1. Start the Working Vehicle: Start the engine of the vehicle with the good battery and let it run for a few minutes.
2. Start the Nautilus: Attempt to start your 2019 Lincoln Nautilus. If it doesn’t start immediately, try again after a few seconds.

Disconnecting the Jumper Cables

Once your Lincoln Nautilus starts, follow these steps to disconnect the jumper cables:

1. Disconnect the Negative (Black) Cables: Remove the black cables, starting with the one connected to the grounding point on the Nautilus and then the one connected to the good battery.
2. Disconnect the Positive (Red) Cables: Remove the red cables, starting with the one connected to the good battery and then the one connected to the dead battery.

Driving and Charging

After successfully jump-starting your Nautilus, drive it for at least 30 minutes to allow the alternator to recharge the battery. If the battery is significantly depleted, you may need to have it tested and potentially replaced.

Troubleshooting

If your 2019 Lincoln Nautilus doesn‘t start after following these steps, it’s possible that the battery is completely dead or there’s another issue. Consider these troubleshooting tips:

  • Check the Battery Connections: Ensure the battery terminals are clean and securely connected.
  • Check the Jumper Cables: Make sure all the clamps are securely attached and making good contact.
  • Check the Alternator: A faulty alternator can prevent the battery from charging, leading to a dead battery. Have your alternator tested by a mechanic.
  • Check the Starter: A faulty starter can also prevent the engine from turning over.

Beyond the Jump Start: Maintaining Your Battery

Jump-starting your battery is a temporary solution. To prevent future dead batteries, consider these maintenance tips:

  • Regular Battery Checks: Have your battery checked regularly by a mechanic.
  • Clean Battery Terminals: Clean the terminals with a wire brush and baking soda solution to remove corrosion.
  • Avoid Short Trips: Frequent short trips don’t give the alternator enough time to fully charge the battery.
  • Use the Right Battery: Ensure you have the correct battery type and size for your 2019 Lincoln Nautilus.

A Final Note on Safety

Jump-starting a vehicle can be a straightforward process, but it’s crucial to prioritize safety. Always follow the steps outlined above and wear safety gear to protect yourself from potential hazards. If you have any doubts or concerns, it’s best to consult a professional mechanic.

Quick Answers to Your FAQs

1. How long should I let the working vehicle run before starting the Nautilus?

It’s recommended to let the working vehicle run for at least 5 minutes to ensure the battery has enough charge to jump-start the Nautilus.

2. What if the Nautilus starts but then dies immediately?

This could indicate a faulty battery or a problem with the starter. Have your battery and starter checked by a mechanic.

3. Can I use jumper cables to start a 2019 Lincoln Nautilus with a completely flat battery?

Yes, you can use jumper cables to start a Nautilus with a completely flat battery, but it’s important to follow the steps carefully and ensure the good battery has enough charge.

4. What should I do if the jumper cables spark when I connect them?

If the jumper cables spark, immediately disconnect them and check for loose connections or a damaged cable. You may need to use a different set of jumper cables.

5. Can I jump start a 2019 Lincoln Nautilus with a different type of vehicle?

It’s generally safe to jump start a Nautilus with a different type of vehicle, but it’s best to use a vehicle with a similar battery voltage (12 volts).

Was this page helpful?

Noah

Noah is a passionate car enthusiast and the author behind NoahThoughts.net, a blog dedicated to providing insightful car guides, knowledge, and helpful tips for drivers of all levels. His writing aims to empower readers with the information they need to confidently navigate the world of automobiles.

Popular Posts:

Leave a Reply / Feedback

Your email address will not be published. Required fields are marked *

Back to top button