How to Jump Start Harley Street 750: Insider Tips Revealed!
What To Know
- Attach the red clamp of the jumper cable to the positive (+) terminal of the dead battery on your Harley Street 750.
- Attach the other red clamp of the jumper cable to the positive (+) terminal of the good battery in your assisting vehicle.
- Attach the other black clamp of the jumper cable to a metal grounding point on the Harley Street 750’s frame.
The Harley Street 750, a powerful and stylish motorcycle, is a dream for many riders. But even the most reliable machines can encounter battery issues, leaving you stranded with a dead battery. Knowing how to jump start your Harley Street 750 can save you time and frustration when you’re on the road. This guide will walk you through the process, ensuring you can get your bike back on the road in no time.
Gather Your Supplies
Before you start, ensure you have the following:
- Jumper cables: Choose cables specifically designed for automotive use.
- A working vehicle: This can be a car, truck, or another motorcycle with a good battery.
- Safety glasses: Protect your eyes from any potential sparks.
- Gloves: Protect your hands from the cold metal parts of the battery.
- A friend or helper: Having someone to assist can make the process safer and easier.
Locate the Battery
The battery on your Harley Street 750 is located under the seat. You’ll need to remove the seat to access it.
1. Open the seat release lever: Located near the rear fender, this lever releases the seat catch.
2. Lift the seat: Gently lift the seat straight up and back to remove it.
3. Locate the battery: The battery is a rectangular box with red and black terminals.
Connect the Jumper Cables
Now it’s time to connect the jumper cables, ensuring you follow the correct order to avoid damaging your motorcycle’s electrical system.
1. Connect the red cable: Attach the red clamp of the jumper cable to the positive (+) terminal of the dead battery on your Harley Street 750.
2. Connect the other red cable: Attach the other red clamp of the jumper cable to the positive (+) terminal of the good battery in your assisting vehicle.
3. Connect the black cable: Attach one black clamp of the jumper cable to the negative (-) terminal of the good battery in your assisting vehicle.
4. Connect the other black cable: Attach the other black clamp of the jumper cable to a metal grounding point on the Harley Street 750’s frame. Avoid connecting it directly to the battery’s negative terminal.
Start the Assisting Vehicle
Once the cables are securely connected, start the assisting vehicle and let it run for a few minutes. This allows the battery to charge the dead battery in your Harley Street 750.
Start the Harley Street 750
After letting the assisting vehicle run for a few minutes, attempt to start your Harley Street 750. If it doesn’t start immediately, try again after a few more minutes of charging.
Disconnect the Jumper Cables
Once your Harley Street 750 starts, it’s crucial to disconnect the jumper cables in the reverse order you connected them:
1. Remove the black cable from the Harley Street 750’s frame.
2. Remove the black cable from the assisting vehicle‘s negative terminal.
3. Remove the red cable from the assisting vehicle‘s positive terminal.
4. Remove the red cable from the Harley Street 750’s positive terminal.
Drive and Charge
After successfully jump-starting your Harley Street 750, drive it for at least 30 minutes. This allows the alternator to charge the battery properly. If you have a battery charger, it’s recommended to charge the battery fully after the ride.
Troubleshooting
If your Harley Street 750 still won’t start after jump-starting, there could be other issues:
- Dead battery: The battery might be completely dead and require replacement.
- Loose connections: Check all the battery cables and connections for tightness.
- Faulty starter: The starter motor might be malfunctioning.
- Fuel issues: The fuel system might have problems, preventing the engine from starting.
Prevent Future Issues
To prevent future battery issues, consider these tips:
- Regularly check the battery: Ensure the battery terminals are clean and tight.
- Use a battery tender: A battery tender keeps the battery charged when not in use.
- Ride regularly: Riding your motorcycle regularly helps keep the battery charged.
- Replace the battery when needed: Batteries have a limited lifespan.
Time to Ride Again
With this comprehensive guide, you’re now equipped to jump start your Harley Street 750 and get back on the road. Remember to always prioritize safety, follow the steps carefully, and seek professional help if you encounter any difficulties.
Frequently Asked Questions
Q: Can I jump start my Harley Street 750 with another motorcycle?
A: Yes, you can jump start your Harley Street 750 with another motorcycle, but ensure the other motorcycle has a strong battery and the same voltage (12v).
Q: How long should I let the assisting vehicle run before trying to start my Harley Street 750?
A: Ideally, let the assisting vehicle run for at least 5 minutes to allow the battery to charge sufficiently.
Q: What happens if I connect the jumper cables incorrectly?
A: Connecting the jumper cables incorrectly can cause sparks, damage the electrical system, or even cause an explosion. Always follow the correct order and double-check your connections.
Q: Can I jump start a Harley Street 750 with a car battery?
A: Yes, you can jump start a Harley Street 750 with a car battery, but ensure the car battery is the same voltage (12v). However, using a motorcycle battery is generally preferred as it provides a more controlled charge.
Q: What if my Harley Street 750 still won’t start after jump-starting?
A: If your Harley Street 750 still won’t start after jump-starting, there might be an underlying issue. It’s best to consult a qualified motorcycle mechanic for diagnosis and repair.