Don’t Get Stuck: Essential Tips for How to Jump Start Lincoln Aviator
What To Know
- Then, connect the other end of the red cable to the positive terminal (+) of the donor vehicle’s battery.
- Attach the black (negative) clamp of the jumper cables to the negative terminal (-) of the donor vehicle’s battery.
- Instead of connecting the black clamp directly to the Aviator’s battery, find a grounded metal surface on the Aviator’s frame or engine block.
The Lincoln Aviator, with its sleek design and powerful engine, is a head-turner on the road. But even the most advanced vehicles can fall victim to a dead battery, leaving you stranded and wondering how to jump start your Lincoln Aviator. Don’t worry, jump starting your Aviator is a straightforward process that can get you back on the road quickly. This guide will walk you through the steps, ensuring a safe and successful jump start.
Gathering Your Supplies
Before you begin, ensure you have the necessary equipment:
- Jumper cables: These are essential for transferring power from a working battery to your Aviator’s depleted battery. Choose heavy-duty cables with insulated clamps for safety.
- Donor vehicle: You’ll need a vehicle with a working battery to provide the jump start.
- Safety glasses: Protect your eyes from any potential sparks or acid splashes.
- Gloves: Wear gloves to protect your hands from the cold metal and potential battery acid.
Parking and Connecting the Cables
1. Park the vehicles safely: Park both vehicles on a level surface, ensuring they are not touching. This minimizes the risk of accidental contact between the vehicles.
2. Engage parking brakes: Engage the parking brakes on both vehicles to prevent them from rolling during the jump start.
3. Turn off all accessories: Turn off all accessories in both vehicles, including the headlights, radio, and air conditioning.
4. Locate the batteries: Open the hoods of both vehicles and locate the batteries. The positive (+) and negative (-) terminals are clearly marked on the battery.
5. Connect the positive cables: Attach the red (positive) clamp of the jumper cables to the positive terminal (+) of the Aviator’s battery. Then, connect the other end of the red cable to the positive terminal (+) of the donor vehicle’s battery.
6. Connect the negative cables: Attach the black (negative) clamp of the jumper cables to the negative terminal (-) of the donor vehicle’s battery. This is important – DO NOT connect the black cable to the Aviator’s battery yet.
7. Connect the negative cable to a grounded metal surface: Instead of connecting the black clamp directly to the Aviator’s battery, find a grounded metal surface on the Aviator’s frame or engine block. This helps prevent sparks and potential damage.
Starting the Vehicles and Disconnecting the Cables
1. Start the donor vehicle: Start the donor vehicle and let it run for several minutes to charge the battery.
2. Start the Aviator: Try starting your Lincoln Aviator. If it doesn’t start immediately, try again after a few minutes.
3. Let the Aviator run for 15 minutes: Once the Aviator starts, let it run for at least 15 minutes to allow the battery to charge sufficiently.
4. Disconnect the cables in reverse order: Start by disconnecting the black cable from the grounded metal surface and then from the donor vehicle’s battery. Next, disconnect the red cable from the donor vehicle’s battery, followed by the red cable from the Aviator’s battery.
Driving and Charging Your Battery
1. Drive the Aviator: Once the Aviator is running properly, drive it for at least 30 minutes to ensure the battery is fully charged.
2. Monitor battery health: After the jump start, monitor your Aviator’s battery health. If the battery continues to have issues, it might need to be replaced.
Troubleshooting and Safety Tips
- If the Aviator won’t start: If you’ve followed all the steps correctly and the Aviator still won’t start, there might be an issue with the starter motor or another electrical component. It’s best to consult a qualified mechanic.
- Avoid touching metal parts: Be cautious when working around batteries, as they can produce a strong electrical current. Avoid touching metal parts while connecting or disconnecting the cables.
- Don’t overcharge the battery: Avoid leaving the jumper cables connected for an extended period, as this can overcharge the battery and cause damage.
- Safety first: If you’re unsure about any step in the process, it’s always best to consult a professional mechanic.
What to Do After a Jump Start
After successfully jump starting your Lincoln Aviator, there are a few things to keep in mind:
- Inspect your battery: Once you’ve driven your Aviator for a while, check your battery terminals for any signs of corrosion or damage. Clean them if necessary.
- Charge your battery: If your battery is old or has been consistently experiencing problems, it’s a good idea to have it checked by a mechanic and potentially replaced.
- Drive regularly: Driving your Aviator regularly helps keep the battery charged. If you only drive occasionally, consider using a battery tender to maintain the charge.
Your Lincoln Aviator is Ready to Roll!
By following these steps, you can confidently jump start your Lincoln Aviator and get back on the road in no time. Remember to prioritize safety, use the correct equipment, and follow the instructions carefully. If you have any doubts, don’t hesitate to consult a professional.
Quick Answers to Your FAQs
Q: Why is my Lincoln Aviator‘s battery dead?
A: Several factors can contribute to a dead battery, including:
- Leaving lights or accessories on: Forgetting to turn off your headlights or other accessories can drain the battery over time.
- Extreme temperatures: Both hot and cold temperatures can affect battery performance.
- Old battery: Batteries have a limited lifespan, and an old battery may not hold a charge as well.
- Electrical problems: A faulty alternator or other electrical components can drain the battery.
Q: How often should I jump start my car?
A: Ideally, you should avoid jump starting your car altogether. If you find yourself needing to jump start your car frequently, it’s a sign that your battery may be failing.
Q: Can I jump start my Lincoln Aviator with a different type of car?
A: Yes, you can jump start your Aviator with a different type of car as long as the donor vehicle has a working battery. However, it’s important to ensure the jumper cables are compatible with both vehicles.
Q: What should I do if my Lincoln Aviator‘s battery is completely dead?
A: If your battery is completely dead, it might not respond to a jump start. In this case, you may need to have the battery replaced or charged by a professional.
Q: Is it safe to jump start my Lincoln Aviator in the rain?
A: It’s not recommended to jump start your car in the rain. Water and electricity don‘t mix, and it can create a dangerous situation. If you need to jump start your car in the rain, find a safe, dry area to do so.