No More Worries: How to Jump Start Mitsubishi ASX Effortlessly!

Whether you’re facing a dead battery after a long night out or a forgotten light left on, knowing how to jump start your Mitsubishi ASX can be a lifesaver. It’s a relatively simple process that can get you back on the road in no time. This guide will walk you through the process step by step, ensuring you can confidently jump start your ASX and avoid any potential damage.

Gather Your Supplies

Before you start, you’ll need a few essential items:

• A working vehicle: A vehicle with a good, charged battery to provide the jump start.
• Jumper cables: Make sure they are in good condition and have insulated clamps.
• Safety glasses: To protect your eyes from any potential sparks.
• Gloves: Optional, but can provide extra protection.

Safety First: Essential Precautions

Jumping a car battery involves working with electricity, so it’s crucial to prioritize safety:

• Never smoke or work near open flames: The fumes from the battery are flammable.
• Never touch the battery terminals while the engine is running: This can result in a severe electric shock.
• Wear safety glasses and gloves: This will protect you from potential sparks and acid spills.
• Ensure the vehicles are parked on a flat surface: This prevents the vehicles from rolling during the jump start process.

Locate the Battery

The Mitsubishi ASX’s battery is typically located in the engine compartment, usually on the passenger side. You’ll find it secured by a plastic cover or a metal bracket.

Connect the Jumper Cables

1. Connect the positive (red) cable to the positive terminal of the dead battery: This terminal is usually marked with a “+” symbol.
2. Connect the other end of the positive cable to the positive terminal of the good battery: Again, look for the “+” symbol.
3. Connect the negative (black) cable to the negative terminal of the good battery: This terminal is usually marked with a “-” symbol.
4. Connect the other end of the negative cable to a metal grounding point on the dead car‘s frame: Avoid connecting it directly to the negative battery terminal. A good grounding point is usually found near the battery.

Start the Vehicles

1. Start the good vehicle: Let it run for a few minutes to ensure the battery is fully charged.
2. Try starting the dead vehicle: If it doesn’t start immediately, let the good vehicle run for a few more minutes before trying again.
3. Once the dead vehicle starts, let it run for at least 15 minutes: This will allow the battery to recharge.

Disconnect the Jumper Cables

1. Disconnect the negative (black) cable from the dead vehicle‘s grounding point: Then disconnect it from the good battery.
2. Disconnect the positive (red) cable from the good battery: Then disconnect it from the dead battery.

Important Considerations

• Don’t let the cables touch each other: This can cause a spark and potentially damage the batteries.
• If the dead vehicle doesn’t start after a few attempts, try jump starting it again: Sometimes it takes a few tries for the battery to recharge enough.
• If the dead vehicle still doesn’t start, there might be another issue: Consider having your battery checked by a mechanic.

What to Do After Jump Starting Your ASX

After successfully jump starting your ASX, it’s important to address the underlying cause of the dead battery:

• Check the battery’s condition: If the battery is old or damaged, it may be time to replace it.
• Inspect for any electrical problems: A faulty alternator or other electrical components can drain the battery.
• Avoid leaving lights or accessories on: This can quickly drain the battery and leave you stranded again.

Beyond Jump Starting: Maintaining Your Mitsubishi ASX Battery

Regular maintenance is key to preventing dead batteries and ensuring your ASX stays reliable:

• Check the battery terminals: Make sure they are clean and free of corrosion.
• Replace the battery every 3-5 years: Battery life varies depending on usage and environmental factors.
• Have the battery tested regularly: A mechanic can test the battery’s health and let you know if it needs to be replaced.

Your ASX is Back on the Road: Time for a Checkup

After jump starting your ASX, it’s a good idea to take it to a mechanic for a comprehensive checkup. This will help ensure that the battery is fully charged and that there are no other underlying issues that could lead to future problems.

Common Questions and Answers

Q: How long should I let the good vehicle run before trying to start the dead vehicle?

A: Let the good vehicle run for at least 5-10 minutes to ensure the battery is fully charged before attempting to start the dead vehicle.

Q: Can I use any type of jumper cables?

A: It’s best to use heavy-duty jumper cables with insulated clamps. Avoid using thin or damaged cables, as they could overheat and cause damage.

Q: What if my ASX doesn‘t start after jump starting it?

A: If your ASX still doesn’t start after jump starting it, there might be another issue with the battery, starter, or alternator. It’s best to have the vehicle checked by a mechanic.

Q: How often should I check my battery terminals?

A: It’s a good idea to check your battery terminals at least once a month, especially if you live in an area with extreme temperatures or humidity.

Q: What are the signs of a bad battery?

A: Signs of a bad battery include slow engine cranking, dimming headlights, and difficulty starting the vehicle, especially in cold weather.