How to Jump Start Yamaha Grizzly 700: A Step-by-Step Guide
What To Know
- Attach the other end of the red cable to the positive (+) terminal of the good battery in your jump start vehicle.
- Remove the black cable from the grounding point on the Yamaha Grizzly 700 frame first, then remove it from the negative (-) terminal of the jump start vehicle.
- Remove the red cable from the positive (+) terminal of the jump start vehicle, then remove it from the positive (+) terminal of the Yamaha Grizzly 700 battery.
The Yamaha Grizzly 700 is a powerful and reliable ATV, but even the best machines can encounter battery problems. A dead battery can leave you stranded in the middle of nowhere, especially if you’re out on a trail or in the wilderness. Knowing how to jump start your Yamaha Grizzly 700 can save you a lot of frustration and potentially dangerous situations.
This comprehensive guide will walk you through the process of jump starting your Yamaha Grizzly 700, ensuring you’re equipped to handle this common issue.
Gather Your Supplies
Before you begin, make sure you have the following materials:
- A working vehicle with a good battery: This will be your jump start source.
- Jumper cables: Choose heavy-duty jumper cables designed for automotive use.
- Safety glasses: Protect your eyes from potential sparks.
- Gloves: Protect your hands from potential battery acid spills.
Locate the Battery
The battery on your Yamaha Grizzly 700 is located beneath the seat. You’ll need to remove the seat to access the battery.
1. Remove the seat: There are two latches on the rear of the seat. Press down on the latches and lift the seat straight up to remove it.
2. Locate the battery: The battery will be situated on the right side of the ATV, near the rear. It’s a standard motorcycle battery, typically secured with a strap.
Connecting the Jumper Cables: A Step-by-Step Guide
Connecting the jumper cables correctly is crucial to avoid damaging your vehicles or causing a short circuit. Follow these steps carefully:
1. Connect the positive (red) cable: Clip one end of the red cable to the positive (+) terminal of the dead battery on your Yamaha Grizzly 700. Make sure the connection is secure.
2. Connect the other end of the red cable: Attach the other end of the red cable to the positive (+) terminal of the good battery in your jump start vehicle.
3. Connect the negative (black) cable: Clip one end of the black cable to the negative (-) terminal of the good battery in your jump start vehicle.
4. Connect the other end of the black cable: Attach the other end of the black cable to a metal grounding point on the frame of your Yamaha Grizzly 700. This point should be far away from the battery and its terminals. A good option is the engine block or the frame near the rear suspension.
Starting the Vehicles
1. Start the good vehicle: Start the engine of your jump start vehicle and let it run for a few minutes. This will ensure the battery is charged and ready to provide power.
2. Attempt to start the Yamaha Grizzly 700: Turn the key on your Yamaha Grizzly 700 and try to start the engine. If the battery is sufficiently charged, the engine should start.
Disconnecting the Jumper Cables
Once the Yamaha Grizzly 700 engine is running, you can safely disconnect the jumper cables.
1. Disconnect the black cable: Remove the black cable from the grounding point on the Yamaha Grizzly 700 frame first, then remove it from the negative (-) terminal of the jump start vehicle.
2. Disconnect the red cable: Remove the red cable from the positive (+) terminal of the jump start vehicle, then remove it from the positive (+) terminal of the Yamaha Grizzly 700 battery.
Driving and Charging the Battery
After jump starting your Yamaha Grizzly 700, it’s essential to drive it for a while to allow the alternator to charge the battery. This will help prevent the battery from dying again soon.
- Drive for at least 30 minutes: This will give the alternator enough time to charge the battery sufficiently.
- Charge the battery: If possible, after driving, connect the battery to a battery charger overnight to ensure it is fully charged.
Troubleshooting Jump Start Issues
If your Yamaha Grizzly 700 doesn’t start after following these steps, there might be other issues:
- Dead battery: If the battery is completely dead, it may need to be replaced.
- Faulty starter: A faulty starter motor can prevent the engine from turning over.
- Fuel issues: Ensure you have enough fuel in the tank and that the fuel lines are not clogged.
- Spark plug issues: A faulty spark plug can prevent the engine from igniting.
Preventing Future Battery Issues
- Regular maintenance: Check your battery’s fluid levels regularly and clean the terminals to prevent corrosion.
- Use a battery tender: A battery tender can help maintain the charge of your battery when it’s not in use.
- Avoid leaving lights on: Always turn off the lights and other accessories when you’re not using them.
Time to Ride Again!
Jump starting your Yamaha Grizzly 700 can be a straightforward process if you follow these steps carefully. Remember to take safety precautions and always use the proper equipment.
By understanding the process and taking preventive measures, you can avoid being stranded with a dead battery and enjoy your adventures on your Yamaha Grizzly 700.
Top Questions Asked
Q: How long can I use jumper cables to start my Yamaha Grizzly 700?
A: It’s best to keep the jumper cables connected for a short period, ideally just long enough to start the engine. Prolonged use can strain both batteries and potentially damage them.
Q: Can I use a car battery to jump start my Yamaha Grizzly 700?
A: Yes, you can use a car battery to jump start your Yamaha Grizzly 700, as long as you follow the proper connection procedures and safety precautions.
Q: What should I do if my battery keeps dying?
A: If your battery keeps dying, it might be a sign of a faulty battery, alternator problem, or excessive electrical draw. It’s recommended to have the ATV inspected by a mechanic to diagnose the issue.
Q: Is it safe to jump start a Yamaha Grizzly 700 in the rain?
A: It’s not recommended to jump start your ATV in the rain. Water and electricity can be a dangerous combination, increasing the risk of electric shock. Wait for dry conditions before attempting a jump start.
Q: How often should I check my battery’s fluid levels?
A: It’s a good practice to check your battery’s fluid levels at least once a month, especially if you use your ATV frequently. This helps ensure the battery stays properly hydrated and performs optimally.