Unlock the Mysteries: How to Reset Oil Light Ford Transit 2017 Like a Pro!

The dreaded oil light. It’s a universal symbol of potential car trouble, and for Ford Transit 2017 owners, it can be a source of anxiety. But before you panic, understand that the oil light doesn’t always signal a major issue. Sometimes, it simply needs to be reset. This guide will walk you through the process of how to reset oil light Ford Transit 2017, ensuring you can address the issue confidently and safely.

Understanding the Oil Light

The oil light in your Ford Transit 2017 serves as a crucial indicator of your engine’s health. It alerts you to low oil pressure, which can lead to serious engine damage if ignored. The light may also illuminate if the oil quality has deteriorated or if there’s a problem with the oil sensor itself.

When to Reset the Oil Light

The oil light should be reset after an oil change. This is because the light is triggered by a timer that counts down the miles between oil changes. Once the timer reaches zero, the light comes on.

However, if the oil light comes on unexpectedly, it’s best to investigate the cause before resetting it.

Common Reasons for an Oil Light

Here are some common reasons why the oil light might come on in your Ford Transit 2017:

• Low oil level: This is the most common reason. Check the dipstick to ensure the oil level is within the acceptable range.
• Oil pressure problems: A faulty oil pump or a clogged oil filter can lead to low oil pressure.
• Oil sensor malfunction: The oil sensor itself might be faulty, leading to an inaccurate reading.

Resetting the Oil Light: The Steps

Step 1: Turn the Ignition Key to the “ON” Position

With the engine off, insert the key into the ignition and turn it to the “ON” position. This will power up the dashboard instruments, including the oil light.

Step 2: Press and Hold the Trip Reset Button

Locate the trip reset button on your dashboard. It’s typically located near the speedometer or the odometer. Press and hold this button down.

Step 3: Turn the Ignition Key to the “OFF” Position

While still holding the trip reset button, turn the ignition key back to the “OFF” position. The oil light should blink a few times before turning off.

Step 4: Release the Trip Reset Button

Once the oil light turns off, release the trip reset button. The oil light should now be reset.

Step 5: Start the Engine

Start the engine and check the dashboard to ensure the oil light remains off.

Troubleshooting Tips

If the oil light doesn‘t reset after following these steps, or if it comes back on shortly after, there may be an underlying issue. Consider these troubleshooting tips:

• Check the oil level: Ensure the oil level is within the acceptable range. If it’s low, add oil to the appropriate level.
• Inspect the oil filter: Make sure the oil filter is properly installed and not clogged.
• Check for leaks: Look for visible oil leaks under the engine.
• Consult a mechanic: If you suspect a problem with the oil pump, oil sensor, or other engine components, consult a qualified mechanic for diagnosis and repair.

Beyond Resetting: Maintaining Your Ford Transit 2017

Resetting the oil light is just one aspect of maintaining your Ford Transit 2017. Here are some essential maintenance tips:

• Regular oil changes: Follow the recommended oil change intervals in your owner’s manual.
• Use the correct oil: Use the type and viscosity of oil recommended by Ford for your vehicle.
• Monitor oil pressure: Regularly check the oil pressure gauge.
• Inspect for leaks: Regularly inspect your engine for oil leaks.

Maintaining a Healthy Engine: The Final Word

Understanding how to reset the oil light in your Ford Transit 2017 is a valuable skill for any owner. However, remember that resetting the light doesn’t address the underlying cause. By following the steps outlined above and taking proactive steps to maintain your vehicle, you can help ensure your Ford Transit 2017 runs smoothly for years to come.

Basics You Wanted To Know

Q1: What happens if I don’t reset the oil light after an oil change?

A: The oil light will remain on, serving as a constant reminder that an oil change is due. While it won’t directly affect the performance of your vehicle, it can be a nuisance and might even trigger other warning lights.

Q2: Can I reset the oil light without an oil change?

A: It’s not recommended to reset the oil light without an oil change. Doing so can lead to engine damage as the oil will continue to degrade and lose its effectiveness.

Q3: Is there a difference between resetting the oil light and resetting the oil change reminder?

A: Yes. Resetting the oil light typically involves resetting the oil change reminder, but it’s not always the same. Some vehicles have separate systems for these functions.

Q4: What if the oil light comes on while I’m driving?

A: If the oil light comes on while driving, pull over safely as soon as possible. Check the oil level, and if it’s low, add oil to the appropriate level. If the light remains on, consult a mechanic to diagnose the issue.